Название
#
Заметки
Купить
Bearing Set - Cam
96-00 .010" undersized ID.
Bearing Set - Main
96-97 Grooved upper & lower in all positions.
Camshaft - Stock
96-97 Use roller followers.
Crank Kit - Reman
96-97 Includes bearings. Forging # 1237, L3, 4618. Check for proper physical
match before installation.
Cylinder Head - Bare
96-00 New bare head without valves or springs. Castings #146 & #507. 33cc
chamber. 2760" guide ID. Valve head diameter 1.732 / 1.458".
Replaces EHC134-1 & EHC134-2.
Cylinder Head - Bare
96-97 New bare head without valves or springs. Casting #391. 33cc chamber.
.2757" guide ID. Valve head diameter 1.732 / 1.460". Freeze plug on
end of head must be removed f
Cylinder Head - Complete
96-97 Reman. Casting #391,391-S. Includes valves & springs.
Expansion Plug Kit
96-97 Steel plugs.
Expansion Plug Kit
96-97 Brass plugs.
Gasket Set - Full
96-97 W/1 pc rear main seal. Use new head bolts.
Gasket Set - Head
96-97 Use new head bolts.
Gasket Set - PER
96-97 Rebuilder set without rear main or valve stem seals. Use new head bolts.
Harmonic Bal. Sleeve
96-00
Head Bolt Set
96-97 One set required.
Head Spacer Shim
96-00 0.020" thick. Install on block side. Use sealer between shim and block.
Piston And Ring Kit
96-97 Dish top .200" deep. 1.142" CH. Kit contains (4) pistons with cast rings.
Piston And Ring Kit
96-97 Dish top .200" deep. 1.142" CH. Kit contains (4) pistons with premium rings.
Piston Ring Set
96-00 Premium. Ductile top. 1.5 / 1.5 / 3.0mm.
Piston Ring Set
96-00 Cast. 1.5 / 1.5 / 3.0mm.
Piston Set
96-97 Dish top .200" deep. Hyper. 1.172" CH. Use R89134 or M89134
rings.
Rear Main Seal
96-00 1pc. Offset lip. Viton.
Rocker Arm
96-97 Rocker arm kit. (1 per pack).
Timing Set
96-00 3pc. set.
Valve - Exhaust
96-97 .2735" stem. 1.452" head.
Valve - Exhaust (O S Stem And Head)
96-97 .2820" stem. 1.478" head. +.008" stem. (8 pack).
Valve - Exhaust (O S Stem And Head)
96-97 .2820" stem. 1.478" head. +.008" stem. (80 / bulk).
Valve - Intake
96-97 .2745" stem. 1.732" head.
Valve - Intake (O S Stem And Head)
96-97 .2825" stem. 1.752" head. +.008" stem. (8 pack).
Valve - Intake (O S Stem And Head)
96-97 .2825" stem. 1.752" head. +.008" stem. (80 / bulk).
Valve Guides
96-97 Intake. .2757 x .5828 x 2.742". Spiral ID. Iron. (4 pack).
Valve Guides
96-97 Exhaust. .2757 x .5828 x 2.320". Spiral ID. Iron. (4 pack).
Valve Lifter
96-00 Hydraulic. Roller follower. (4 pack).
Valve Lifter
96-00 Hydraulic. Roller follower. (128 / tray).
Valve Seal - OE Type
96-97 Viton. (20 pack).
Valve Seal - OE Type
96-97 (100 pack).
Valve Seat
96-00 Exhaust. 1.2650/1.294T x 1.5695 x .2800". 45 Deg. Hi-Chrome Cast. (4 pack).
Valve Seat
96-00 Inaket. 1.500/1.555T x 1.8195 x .2780". 45 Deg. Hi-Chrome Cast. (4 pack).
Valve Spring
96-97 Int. & Exh. 1.960" Free Ht. Conical. (4 pack).
