Название
#
Заметки
Купить
Camshaft - Stock
98-01 Use roller followers.
Connecting Rod - Stock
98-01 Reconditioned. Press fit pins. Forging #F87E.
Cylinder Head - Bare
98-01 New bare head without valves or springs. Thermostat bolt holes are 8mm
(must verify before ordering). Casting #F57E. .2765" guide ID. Valve
head diameter 1.500 / 1.73
Cylinder Head - Complete
98-01 Reman. Casting #F57E,F87E,F5J7. Thermostat bolt holes are 6mm (must
verify before ordering). Includes valves, springs, camshaft & lifters.
Does not include front cam s
Cylinder Head - Complete
98-01 Reman. Casting #F57E,F87E,F5J7. Thermostat bolt holes are 8mm (must
verify before ordering). Includes valves, springs, camshaft & lifters.
Does not include front cam s
Cylinder Sleeve
98-01 3/32 x 3.780 x 5.500"
Gasket Set - Full
98-98 Use new head bolts.
Gasket Set - Lower
98-01 Rear main seal
Head Bolt Set
98-01 One set required.
Oil Pump
98-01 Enginetech "Pressure King" value line pump.
Piston Ring Set
98-01 Premium. Steel top. 1.5 / 1.5 / 3.0mm.
Piston Set
98-01 Dish top. 1.190" CH. Use C96034 rings.
Rear Main Seal
98-01 1pc. Offset lip. Viton.
Timing Belt Tensioner
98-01
Valve - Exhaust
98-01 .2740" stem. 1.500" head.
Valve - Intake
98-01 .2750" stem. 1.735" head.
Valve Guides
98-01 Int. & Exh. .2765 x .4953 x 1.930". Spiral ID. Iron. (4 pack)
Valve Guides
98-01 Int. & Exh. .2765 x .4953 x 1.930". Spiral ID. Iron. (100 pack)
Valve Lifter
98-01 Hydraulic. Lash adjuster. (4 pack).
Valve Lifter
98-01 Hydraulic. Lash adjuster. (120 / tray).
Valve Seal - OE Type
98-98 Viton. (20 pack).
Valve Seal - OE Type
98-98 Viton. (100 pack).
